Heinrichs Messtechnik GmbH • Robert-Perthel-Straße 9 • 50739 Köln • Tel.: +49 (221) 49708-0 • info@heinrichs.eu
Deutsch 
Pressure transmitter
- Measurement of gauge and absolute pressure
- High accuracy: ±0.075 % of calibrated span
- Large span ratio: 100:1
- Continuous self-diagnostic function
- Automatic compensation of the ambient temperature
The KOBOLD pressure transmitter type PAS is a high performance microprocessor based transmitter with flexible pressure calibration and flexible output. It features automatic compensation of ambient temperature and process variables.
By means of the HART® protocol it is possible to communicate with the device and to perform a configuration of various parameters. All data of the sensor are read into an EEPROM, modified and stored.
Applications
The pressure transmitter type PAS is available as piezoresistive pressure sensor and measures gauge pressure as well as absolute pressure. The sensor module converts the resistance into a digital value. The microprocessor control unit calculates the process pressure based on this digital value.
Special features
- High accuracy: ±0.075% of the set span, optionally ±0.04% of the set span
- Span ratio: 100:1
- Automatic compensation of the ambient temperature
- Configuration via handheld terminal or PC.
- Membrane in 1.4404, Tantal or Hastelloy C
- Explosion proof housing.
- Attachment of various diaphragm seals (directly or via capillary lines)
Technical data
- Measuring span: -1…1.5 bar to 0…600 bar
- Accuracy: ±0.075% of the set span
- Process temperature: -30 °C…+120 °C
- Ambient temperature: -40 °C…+85 °C
- Storage temperature: -40 °C…+85 °C
Wetted parts
- Membrane: 1.4404 (316L), Tantal, Hastelloy-C
- Process connection: 1.4401, Hastelloy C
- Liquid filling: silicone oil or inert filling liquid
- Electronics housing: Die-cast aluminum (optionally 316L), flameproof Ex “d” enclosure
- Protection class: IP67
- Lacquer finish: epoxy-polyester or polyurethane
- Mounting bracket: for 2″ pipe, 1.4301 (304) or painted steel
- Process connection: 1/4-18 NPT i via adapter 1/2-14 NPT i
- Display: 5-digit LCD
- Power supply: 12…45 VDC, 17.5…45 VDC for HART® communication
- Max. Load: 250 Ohm at 17.5 VDC, 550 Ohm at 24 VDC
- Cable entry: ½”-14 NPT / G ½
- Output: 2-wire 4-20 mA HART®, linear
Certificates and Approvals
ATEX II 2G Exd IIC T6…T4
Communication
HART®-protocol
